Autoclave sterilizers – Buying guide & Comparison
If you are short on time and you just want to find the best autoclave sterilizers, this short paragraph should help you get just the model you may need. According to our findings, the Taishi NV-210 is the best option if you’re looking for a portable autoclave sterilizer that does wonders in small dental practices as well as for veterinary applications. The unit offers the advantage of dry heat, which means that it should not be cleaned as frequently as the ones that rely on wet heat. Besides, some of the functions belonging to the Taishi NV-210 make it remarkably easy to use, in that you won’t have to waste a lot of time customizing the time and settings of the device. Plus, once they’ve been set, they can be reused time and time again, thus improving your workflow. If the Taishi NV-210 is unavailable, your second option should be the Tuttnauer 2540M.
Purchasing an autoclave sterilizer machine can look like a daunting task due to the wide array of products that are available in today’s market. Your buying journey doesn’t have to be all that complicated, as long as you stick to some basic rules. We’ve compiled some of the critical information you should consider when you’re in the market for an autoclave for sterilization and we hope that our guide assists you in making the right decision.
Before you even consider the size or number of trays or even the dimensions of the entire product, you ought to find out all there’s to know about it with regard to the maximum temperature it can achieve, source of steam it should use, pressure, contact, and the length of time in every cycle. Most of the convenient models we have seen feature operating cycles of about thirty to forty minutes and if ten minutes matter a lot for you and can significantly contribute to your lab’s productivity, that’s for you to tell.
Ease of use and convenience
These are two other factors to take into account as you need to find out if the autoclave sterilization process should be performed by an operator with a certain expertise in the field or it can be done by virtually anyone in the lab. While the operating basics of such a machine aren’t too complicated to figure out, it’s safe to say that some people might have more important things to do than spend twelve hours trying to understand the instruction manual.
One feature that relates both to safety and to convenience is whether or not the model comes with a manual control. If there’s a power failure, you or someone else in the lab should be able to complete an entire sterilization cycle just manually. This type of control should be located at hand and make it possible for the operator to stay safe at all times.
Both the chamber and the controls of the unit should have a particular thermal resistance that makes it impossible for them to be affected extreme temperatures. What’s more, several substances such as chlorides are commonly employed in various areas of medicine, which is why a medical autoclave sterilizer should have a chamber constructed out of nickel clad as this is virtually the only material that cannot be affected by these chemicals. Even stainless steel can be damaged by chlorides over time.
To make sure that you purchase the right product, we recommend checking for the ASME standards. This detail might be less important for models that just use dry heat and whose temperatures cannot exceed four hundred degrees Fahrenheit, for instance, but even these have to be in complete accordance with the requirements imposed by the ASME.
It is recommended that you get an electric autoclave sterilizer that comes with a microcomputer control that is not mounted over the door. This design can significantly increase the durability of the product as the controls will not be exposed to the heat or steam coming out of the autoclave.
Compact models can be very affordable but they strictly speak to the needs of professionals who require a limited number of pieces of equipment. Veterinarians and dentists can use this type especially as they can sterilize their instruments rather often, thanks to the many cycles they can perform in a day. That’s why they may not need the services of a large autoclave with many trays for multiple instruments. However, full-size professional alternatives can be bought for about four thousand dollars or more, depending on their capabilities and dimensions. Regardless of the one you will end up choosing, you ought to be aware of the fact that your research should involve reading some of the best autoclave sterilizer reviews as other buyers can give you pointers with regard to the potential mishaps you might experience.
Top autoclave sterilizer reviews in 2017
The best autoclave sterilizers are showcased below. While these are all critically acclaimed units, we feel compelled to underline that they have different purposes and are intended for diverse applications. Even though they might be the most efficient products on the market today, it’s safe to say only you can decide if they meet your needs and expectations.
The Taishi NV-210 is one of the top rated choices in the industry if what you have in mind is getting a compact model that doesn’t take up too much space in your laboratory of practice.
Weighing in at just 7.4 pounds, it is easy to see why the Taishi is popular among dentists and other professionals who might own or work in small clinics where the use of an autoclave is mandatory. The maximum temperature that can be reached by this product is 392 degrees Fahrenheit.
Given the fact that this model is a dry heat sterilizer, it requires very little expertise on the part of the owner and can even be set up conveniently by the person who will operate it in the future.
This is a net advantage as most vacuum steam autoclave sterilizers have to be installed by specialists and as such, the cost of setup might take a toll on your budget.
It is recommended that you avoid the use of chemicals such as chloride because the chamber of this product has been constructed with stainless steel which can be affected by various substances. The people who have bought this model have nothing but good things to report as it is compact, clean, and gets the job done.
Buy from Amazon.com for ($119)
In spite of the fact that it is significantly less affordable compared to other alternatives we’ve found in the same line, the Tuttnauer 2540M has captured our attention because of its excellent specs.
Both the door and the chamber of this autoclave have been electropolished, and the double safety locking device makes it close to impossible for the door to open while the machine is operating. In addition, the Tuttnauer 2540M has been equipped with a dual safety thermostat that can let the operator know if anything is going wrong. Besides, the thermostat plays the important part of preventing overheating.
The Tuttnauer model is a 23-L autoclave that can be used with four trays measuring 16.3 x 6.7 x 0.8 inches.
Both cold and hot cycles are available with this unit, and these two different sequences have unique operating times. For instance, if you were to perform a cold cycle, you’d have to wait for thirty minutes whereas hot cycles take just fourteen minutes.
The Tuttnauer 2540M requires the use of water, but it can be poured in the autoclave by using the front door. Weighing in at eighty-five pounds it is easy to see that the 2540M is more destined for professional and industrial applications than for small ones.
Buy from Amazon.com for ($4499.99)
The Denshine unit is yet another versatile alternative that can be used in different situations that may require the use of a somewhat portable machine.
As is the case with the formerly mentioned Tuttnauer option, this one is also a sterilizer with vacuum pressure steam that has been built in accordance with the European B and EN13060 standards.
One of the main reasons you might want to consider this product is that it is very easy to use and features user-friendly controls that are all placed on the door.
Based on the info that we have gathered about this unit, it looks as it can be utilized for sterilizing many types of materials and pieces of equipment which may range from sanitary items such as medical dressings and cotton to heat-resistant plasticware and various medical instruments, as well.
Operating the device is safe and convenient as it even features a unique alarm that notifies the users when the wastewater has to be removed. It is important to underline that the operation cannot continue when the wastewater has reached a certain level and that the machine does not utilize this type of liquid to attempt the sterilization of the pieces in the trays.
Buy from Amazon.com for ($2499)
Much like the first model we’ve showcased earlier on, the Denshine Mini is mostly intended for medical users who need their utensils and instruments sterilized while they’re on the go. In spite of the fact that it is both compact and lightweight, this unit uses wet heat to sterilize any items.
The maximum temperature that can be achieved with the help of this unit is 273 degrees Fahrenheit, so in some respects, the Denshine Mini has a lower performance when compared to the full-size alternatives we’ve described above.
However, it does come with a number of features that make it worth taking into account and the most important one seems to be the fact that it has been build in accordance with the ISO 13485 standard and has received the certification, as well.
Weighing in at just 17.6 pounds, the Denshine Mini is a portable unit that gives owners the freedom to move it around, in case they can’t use the lab space as they would feel like.
Everybody knows how tedious it is to do some remodeling and move large and heavy equipment from one room to the next. Fortunately, the Denshine Mini will be one of the lightest devices you’ll own.
Buy from Amazon.com for ($986.99)
Bestlife Dental Medical
It would have been close to impossible to avoid including this unit in our selection given the fact that it is user-friendly and comes with all the characteristics you might want from a reliable 12-liter autoclave without a data printer.
On the one hand, it doesn’t raise any technical difficulties to the people using it as all the information is displayed on the built-in LCD. What’s more, the interface is rather friendly and the touch panel is fairly easy to clean.
It is worth noting that the chamber of this autoclave sterilizer is made with stainless steel so using various chemicals should be avoided.
The core reason you might feel the need to order and utilize this product is that it is extremely affordable and can usually be bought for less than nine hundred dollars. In the world of professional laboratory sterilizers, this price is practically unseen, unless you plan to opt for a super-compact model that doesn’t even use vacuum steam.
Moreover, it should be underlined that the versatility and convenience offered by this model cannot be denied considering the fact that it offers all the benefits of sixteen security system and six sterilization cycles.
Buy from Amazon.com for ($775)